Split up STM32 pins files (#17212)

2020-03-20 23:45:00 -05:00
parent 3151856e98
commit 04cea864bc
45 changed files with 42 additions and 42 deletions
--- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h
+++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h
@@ -0,0 +1,137 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * MKS Robin nano (STM32F130VET6) board pin assignments
+ */
+
+#ifndef __STM32F1__
+  #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
+#elif HOTENDS > 2 || E_STEPPERS > 2
+  #error "MKS Robin nano supports up to 2 hotends / E-steppers. Comment out this line to continue."
+#endif
+
+#define BOARD_INFO_NAME "MKS Robin nano"
+
+//
+// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
+//
+#define DISABLE_DEBUG
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN        PA15
+#define Y_STOP_PIN        PA12
+#define Z_MIN_PIN         PA11
+#define Z_MAX_PIN         PC4
+
+#ifndef FIL_RUNOUT_PIN
+  #define FIL_RUNOUT_PIN   PA4   // MT_DET
+#endif
+
+//
+// Steppers
+//
+#define X_ENABLE_PIN       PE4
+#define X_STEP_PIN         PE3
+#define X_DIR_PIN          PE2
+
+#define Y_ENABLE_PIN       PE1
+#define Y_STEP_PIN         PE0
+#define Y_DIR_PIN          PB9
+
+#define Z_ENABLE_PIN       PB8
+#define Z_STEP_PIN         PB5
+#define Z_DIR_PIN          PB4
+
+#define E0_ENABLE_PIN      PB3
+#define E0_STEP_PIN        PD6
+#define E0_DIR_PIN         PD3
+
+#define E1_ENABLE_PIN      PA3
+#define E1_STEP_PIN        PA6
+#define E1_DIR_PIN         PA1
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN         PC1   // TH1
+#define TEMP_1_PIN         PC2   // TH2
+#define TEMP_BED_PIN       PC0   // TB1
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN       PC3   // HEATER1
+#define HEATER_1_PIN       PB0   // HEATER2
+#define HEATER_BED_PIN     PA0   // HOT BED
+
+#define FAN_PIN            PB1   // FAN
+
+//
+// Thermocouples
+//
+//#define MAX6675_SS_PIN     PE5  // TC1 - CS1
+//#define MAX6675_SS_PIN     PE6  // TC2 - CS2
+
+//
+// Misc. Functions
+//
+#define POWER_LOSS_PIN     PA2   // PW_DET
+#define PS_ON_PIN          PA3   // PW_OFF
+
+#define LED_PIN            PB2
+
+//
+// SD Card
+//
+#define SDIO_SUPPORT
+#define SD_DETECT_PIN      PD12
+
+//
+// LCD / Controller
+//
+#define BEEPER_PIN         PC5
+
+/**
+ * Note: MKS Robin TFT screens use various TFT controllers.
+ * If the screen stays white, disable 'LCD_RESET_PIN'
+ * to let the bootloader init the screen.
+ */
+#if ENABLED(FSMC_GRAPHICAL_TFT)
+  #define FSMC_CS_PIN        PD7    // NE4
+  #define FSMC_RS_PIN        PD11   // A0
+
+  #define LCD_RESET_PIN      PC6    // FSMC_RST
+  #define NO_LCD_REINIT             // Suppress LCD re-initialization
+
+  #define LCD_BACKLIGHT_PIN  PD13
+
+  #if ENABLED(TOUCH_BUTTONS)
+    #define TOUCH_CS_PIN     PA7  // SPI2_NSS
+    #define TOUCH_SCK_PIN    PB13 // SPI2_SCK
+    #define TOUCH_MISO_PIN   PB14 // SPI2_MISO
+    #define TOUCH_MOSI_PIN   PB15 // SPI2_MOSI
+  #endif
+#endif