3d-print/anadyr-marlin
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Various fixups to configs, spacing, etc.

Browse Source
This commit is contained in:
Scott Lahteine
2018-09-06 05:33:16 -05:00
parent b3efbc6e6e
commit 2a61c9a939
70 changed files with 211 additions and 265 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
View File

@@ -1637,16 +1637,16 @@
* Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
* Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
*/
#define MAX7219_DEBUG
//#define MAX7219_DEBUG
#if ENABLED(MAX7219_DEBUG)
#define MAX7219_CLK_PIN 64
#define MAX7219_DIN_PIN 57
#define MAX7219_LOAD_PIN 44
#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix
//#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix
#define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral)
#define MAX7219_NUMBER_UNITS 2 // Number of Max7219 units in chain.
#define MAX7219_ROTATE 180 // Rotate the display clockwise (in multiples of +/- 90°)
#define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain.
#define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°)
// connector at: right=0 bottom=-90 top=90 left=180
/**