Format some pins files
This commit is contained in:
Scott Lahteine
committed by
Scott Lahteine
Scott Lahteine
parent
9340a33980
commit
2c325c2a7d
@@ -40,70 +40,70 @@
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#define SERVO0_PIN P2_04
|
||||
#define SERVO0_PIN P2_04
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_MIN_PIN P1_24 // 10k pullup to 3.3V
|
||||
#define X_MAX_PIN P1_25 // 10k pullup to 3.3V
|
||||
#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V
|
||||
#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V
|
||||
#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V
|
||||
#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V
|
||||
#define X_MIN_PIN P1_24 // 10k pullup to 3.3V
|
||||
#define X_MAX_PIN P1_25 // 10k pullup to 3.3V
|
||||
#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V
|
||||
#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V
|
||||
#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V
|
||||
#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V
|
||||
|
||||
//
|
||||
// Z Probe (when not Z_MIN_PIN)
|
||||
//
|
||||
#ifndef Z_MIN_PROBE_PIN
|
||||
#define Z_MIN_PROBE_PIN P1_29
|
||||
#define Z_MIN_PROBE_PIN P1_29
|
||||
#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN P2_00
|
||||
#define X_DIR_PIN P0_05
|
||||
#define X_ENABLE_PIN P0_04
|
||||
#define X_CS_PIN P1_10 // Ethernet Expansion - Pin 9
|
||||
#define X_STEP_PIN P2_00
|
||||
#define X_DIR_PIN P0_05
|
||||
#define X_ENABLE_PIN P0_04
|
||||
#define X_CS_PIN P1_10 // Ethernet Expansion - Pin 9
|
||||
|
||||
#define Y_STEP_PIN P2_01
|
||||
#define Y_DIR_PIN P0_11
|
||||
#define Y_ENABLE_PIN P0_10
|
||||
#define Y_CS_PIN P1_09 // Ethernet Expansion - Pin 10
|
||||
#define Y_STEP_PIN P2_01
|
||||
#define Y_DIR_PIN P0_11
|
||||
#define Y_ENABLE_PIN P0_10
|
||||
#define Y_CS_PIN P1_09 // Ethernet Expansion - Pin 10
|
||||
|
||||
#define Z_STEP_PIN P2_02
|
||||
#define Z_DIR_PIN P0_20
|
||||
#define Z_ENABLE_PIN P0_19
|
||||
#define Z_CS_PIN P1_00 // Ethernet Expansion - Pin 11
|
||||
#define Z_STEP_PIN P2_02
|
||||
#define Z_DIR_PIN P0_20
|
||||
#define Z_ENABLE_PIN P0_19
|
||||
#define Z_CS_PIN P1_00 // Ethernet Expansion - Pin 11
|
||||
|
||||
#define E0_STEP_PIN P2_03
|
||||
#define E0_DIR_PIN P0_22
|
||||
#define E0_ENABLE_PIN P0_21
|
||||
#define E0_CS_PIN P1_04 // Ethernet Expansion - Pin 12
|
||||
#define E0_STEP_PIN P2_03
|
||||
#define E0_DIR_PIN P0_22
|
||||
#define E0_ENABLE_PIN P0_21
|
||||
#define E0_CS_PIN P1_04 // Ethernet Expansion - Pin 12
|
||||
|
||||
#define E1_STEP_PIN P2_08
|
||||
#define E1_DIR_PIN P2_13
|
||||
#define E1_ENABLE_PIN P4_29
|
||||
#define E1_CS_PIN P1_01 // Ethernet Expansion - Pin 14
|
||||
#define E1_STEP_PIN P2_08
|
||||
#define E1_DIR_PIN P2_13
|
||||
#define E1_ENABLE_PIN P4_29
|
||||
#define E1_CS_PIN P1_01 // Ethernet Expansion - Pin 14
|
||||
|
||||
#define E2_STEP_PIN P1_20
|
||||
#define E2_DIR_PIN P1_19
|
||||
#define E2_ENABLE_PIN P1_21
|
||||
#define E2_CS_PIN P1_18 // FET 6
|
||||
#define E2_STEP_PIN P1_20
|
||||
#define E2_DIR_PIN P1_19
|
||||
#define E2_ENABLE_PIN P1_21
|
||||
#define E2_CS_PIN P1_18 // FET 6
|
||||
|
||||
//
|
||||
// Default pins for TMC software SPI
|
||||
//
|
||||
#if ENABLED(TMC_USE_SW_SPI)
|
||||
#ifndef TMC_SW_MOSI
|
||||
#define TMC_SW_MOSI P1_16 // Ethernet Expansion - Pin 5
|
||||
#define TMC_SW_MOSI P1_16 // Ethernet Expansion - Pin 5
|
||||
#endif
|
||||
#ifndef TMC_SW_MISO
|
||||
#define TMC_SW_MISO P1_17 // Ethernet Expansion - Pin 6
|
||||
#define TMC_SW_MISO P1_17 // Ethernet Expansion - Pin 6
|
||||
#endif
|
||||
#ifndef TMC_SW_SCK
|
||||
#define TMC_SW_SCK P1_08 // Ethernet Expansion - Pin 7
|
||||
#define TMC_SW_SCK P1_08 // Ethernet Expansion - Pin 7
|
||||
#endif
|
||||
#endif
|
||||
|
||||
@@ -111,42 +111,42 @@
|
||||
// Analog Inputs
|
||||
// 3.3V max when defined as an analog input
|
||||
//
|
||||
#define TEMP_0_PIN P0_23_A0
|
||||
#define TEMP_BED_PIN P0_24_A1
|
||||
#define TEMP_1_PIN P0_25_A2
|
||||
#define TEMP_0_PIN P0_23_A0
|
||||
#define TEMP_BED_PIN P0_24_A1
|
||||
#define TEMP_1_PIN P0_25_A2
|
||||
#if ENABLED(FILAMENT_WIDTH_SENSOR)
|
||||
#define FILWIDTH_PIN P0_26_A3
|
||||
#define FILWIDTH_PIN P0_26_A3
|
||||
#else
|
||||
#define TEMP_2_PIN P0_26_A3
|
||||
#define TEMP_2_PIN P0_26_A3
|
||||
#endif
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_BED_PIN P2_05
|
||||
#define HEATER_0_PIN P2_07 // FET 1
|
||||
#define HEATER_1_PIN P1_23 // FET 2
|
||||
#define HEATER_2_PIN P1_22 // FET 3
|
||||
#define HEATER_BED_PIN P2_05
|
||||
#define HEATER_0_PIN P2_07 // FET 1
|
||||
#define HEATER_1_PIN P1_23 // FET 2
|
||||
#define HEATER_2_PIN P1_22 // FET 3
|
||||
#ifndef FAN_PIN
|
||||
#define FAN_PIN P2_06 // FET 4
|
||||
#define FAN_PIN P2_06 // FET 4
|
||||
#endif
|
||||
|
||||
//
|
||||
// Auto fans
|
||||
//
|
||||
#if HOTENDS == 3
|
||||
#define AUTO_FAN_PIN P1_18 // FET 6
|
||||
#define AUTO_FAN_PIN P1_18 // FET 6
|
||||
#else
|
||||
#define AUTO_FAN_PIN P1_22 // FET 3
|
||||
#define AUTO_FAN_PIN P1_22 // FET 3
|
||||
#endif
|
||||
#define ORIG_E0_AUTO_FAN_PIN AUTO_FAN_PIN
|
||||
#define ORIG_E1_AUTO_FAN_PIN AUTO_FAN_PIN
|
||||
#define ORIG_E2_AUTO_FAN_PIN AUTO_FAN_PIN
|
||||
#define ORIG_E0_AUTO_FAN_PIN AUTO_FAN_PIN
|
||||
#define ORIG_E1_AUTO_FAN_PIN AUTO_FAN_PIN
|
||||
#define ORIG_E2_AUTO_FAN_PIN AUTO_FAN_PIN
|
||||
|
||||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
#define LED_PIN P4_28 // Play LED
|
||||
#define LED_PIN P4_28 // Play LED
|
||||
|
||||
//
|
||||
// M3/M4/M5 - Spindle/Laser Control
|
||||
@@ -155,9 +155,9 @@
|
||||
#undef HEATER_0_PIN
|
||||
#undef HEATER_BED_PIN
|
||||
#undef FAN_PIN
|
||||
#define SPINDLE_LASER_ENA_PIN P2_07 // FET 1
|
||||
#define SPINDLE_LASER_PWM_PIN P2_05 // Bed FET
|
||||
#define SPINDLE_DIR_PIN P2_06 // FET 4
|
||||
#define SPINDLE_LASER_ENA_PIN P2_07 // FET 1
|
||||
#define SPINDLE_LASER_PWM_PIN P2_05 // Bed FET
|
||||
#define SPINDLE_DIR_PIN P2_06 // FET 4
|
||||
#endif
|
||||
|
||||
//
|
||||
@@ -173,54 +173,54 @@
|
||||
|
||||
#if ENABLED(FYSETC_MINI_12864)
|
||||
|
||||
#define FORCE_SOFT_SPI // REQUIRED - results in LCD soft SPI mode 3
|
||||
#define FORCE_SOFT_SPI // REQUIRED - results in LCD soft SPI mode 3
|
||||
|
||||
#define BEEPER_PIN P1_31 // EXP1-1
|
||||
#define BTN_ENC P1_30 // EXP1-2
|
||||
#define DOGLCD_CS P0_18 // EXP1-3
|
||||
#define DOGLCD_A0 P0_16 // EXP1-4
|
||||
#define LCD_RESET_PIN P0_15 // EXP1-5
|
||||
#define BEEPER_PIN P1_31 // EXP1-1
|
||||
#define BTN_ENC P1_30 // EXP1-2
|
||||
#define DOGLCD_CS P0_18 // EXP1-3
|
||||
#define DOGLCD_A0 P0_16 // EXP1-4
|
||||
#define LCD_RESET_PIN P0_15 // EXP1-5
|
||||
|
||||
// A custom cable is REQUIRED for EXP2 cable because the SCK & MOSI on the card's EXP2 are dedicated
|
||||
// to the onboard SD card. All required EXP2 signals come from the Ethernet connector. Pin 1 of this
|
||||
// connector is the one nearest the motor power connector.
|
||||
#define DOGLCD_SCK P1_17 // EXP2-2 => Ethernet pin 5 (bottom, 3 from left)
|
||||
#define BTN_EN2 P1_09 // EXP2-3 => Ethernet pin 9 (bottom, 5 from left)
|
||||
#define BTN_EN1 P1_04 // EXP2-5 => Ethernet pin 11 (bottom, 6 from left)
|
||||
#define DOGLCD_MOSI P1_01 // EXP2-6 => Ethernet pin 13 (bottom, 7 from left)
|
||||
#define DOGLCD_SCK P1_17 // EXP2-2 => Ethernet pin 5 (bottom, 3 from left)
|
||||
#define BTN_EN2 P1_09 // EXP2-3 => Ethernet pin 9 (bottom, 5 from left)
|
||||
#define BTN_EN1 P1_04 // EXP2-5 => Ethernet pin 11 (bottom, 6 from left)
|
||||
#define DOGLCD_MOSI P1_01 // EXP2-6 => Ethernet pin 13 (bottom, 7 from left)
|
||||
|
||||
// A custom EXP1 cable is required colored LEDs. Pins 1-5, 9, 10 of the cable go to pins 1-5, 9, 10
|
||||
// on the board's EXP1 connector. Pins 6, 7, and 8 of the EXP1 cable go to the Ethernet connector.
|
||||
// Rev 1.2 displays do NOT require the RGB LEDs. 2.0 and 2.1 displays do require RGB.
|
||||
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
|
||||
#ifndef RGB_LED_R_PIN
|
||||
#define RGB_LED_R_PIN P1_16 // EXP1-6 => Ethernet pin 6 (top row, 3 from left)
|
||||
#define RGB_LED_R_PIN P1_16 // EXP1-6 => Ethernet pin 6 (top row, 3 from left)
|
||||
#endif
|
||||
#ifndef RGB_LED_G_PIN
|
||||
#define RGB_LED_G_PIN P1_10 // EXP1-7 => Ethernet pin 10 (top row, 5 from left)
|
||||
#define RGB_LED_G_PIN P1_10 // EXP1-7 => Ethernet pin 10 (top row, 5 from left)
|
||||
#endif
|
||||
#ifndef RGB_LED_B_PIN
|
||||
#define RGB_LED_B_PIN P1_00 // EXP1-8 => Ethernet pin 12 (top row, 6 from left)
|
||||
#define RGB_LED_B_PIN P1_00 // EXP1-8 => Ethernet pin 12 (top row, 6 from left)
|
||||
#endif
|
||||
#elif ENABLED(FYSETC_MINI_12864_2_1)
|
||||
#define NEOPIXEL_PIN P1_16 // EXP1-6 => Ethernet pin 6 (top row, 3 from left)
|
||||
#define NEOPIXEL_PIN P1_16 // EXP1-6 => Ethernet pin 6 (top row, 3 from left)
|
||||
#endif
|
||||
|
||||
#elif HAS_SPI_LCD
|
||||
|
||||
#define BEEPER_PIN P1_31 // EXP1-1
|
||||
//#define SD_DETECT_PIN P0_27 // EXP2-7
|
||||
#define BEEPER_PIN P1_31 // EXP1-1
|
||||
//#define SD_DETECT_PIN P0_27 // EXP2-7
|
||||
|
||||
#define BTN_EN1 P3_26 // EXP2-5
|
||||
#define BTN_EN2 P3_25 // EXP2-3
|
||||
#define BTN_ENC P1_30 // EXP1-2
|
||||
#define BTN_EN1 P3_26 // EXP2-5
|
||||
#define BTN_EN2 P3_25 // EXP2-3
|
||||
#define BTN_ENC P1_30 // EXP1-2
|
||||
|
||||
#define LCD_PINS_RS P0_16 // EXP1-4
|
||||
#define LCD_SDSS P0_28 // EXP2-4
|
||||
#define LCD_PINS_ENABLE P0_18 // EXP1-3
|
||||
#define LCD_PINS_D4 P0_15 // EXP1-5
|
||||
#define LCD_PINS_RS P0_16 // EXP1-4
|
||||
#define LCD_SDSS P0_28 // EXP2-4
|
||||
#define LCD_PINS_ENABLE P0_18 // EXP1-3
|
||||
#define LCD_PINS_D4 P0_15 // EXP1-5
|
||||
|
||||
#define KILL_PIN P2_11 // EXP2-10
|
||||
#define KILL_PIN P2_11 // EXP2-10
|
||||
|
||||
#endif // HAS_SPI_LCD
|
||||
|
||||
@@ -228,22 +228,22 @@
|
||||
// SD Support
|
||||
//
|
||||
#ifndef SDCARD_CONNECTION
|
||||
#define SDCARD_CONNECTION ONBOARD
|
||||
#define SDCARD_CONNECTION ONBOARD
|
||||
#endif
|
||||
|
||||
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
|
||||
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
|
||||
|
||||
#if SD_CONNECTION_IS(LCD)
|
||||
#define SCK_PIN P0_07 // (52) system defined J3-9 & AUX-3
|
||||
#define MISO_PIN P0_08 // (50) system defined J3-10 & AUX-3
|
||||
#define MOSI_PIN P0_09 // (51) system defined J3-10 & AUX-3
|
||||
#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin
|
||||
#define SCK_PIN P0_07 // (52) system defined J3-9 & AUX-3
|
||||
#define MISO_PIN P0_08 // (50) system defined J3-10 & AUX-3
|
||||
#define MOSI_PIN P0_09 // (51) system defined J3-10 & AUX-3
|
||||
#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin
|
||||
#elif SD_CONNECTION_IS(ONBOARD)
|
||||
#undef SD_DETECT_PIN
|
||||
#define SCK_PIN P0_07
|
||||
#define MISO_PIN P0_08
|
||||
#define MOSI_PIN P0_09
|
||||
#define SS_PIN ONBOARD_SD_CS_PIN
|
||||
#define SCK_PIN P0_07
|
||||
#define MISO_PIN P0_08
|
||||
#define MOSI_PIN P0_09
|
||||
#define SS_PIN ONBOARD_SD_CS_PIN
|
||||
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
|
||||
#error "No custom SD drive cable defined for this board."
|
||||
#endif
|
||||
@@ -251,16 +251,16 @@
|
||||
//
|
||||
// Ethernet pins
|
||||
//
|
||||
//#define ENET_MDIO P1_17 // Ethernet pin 5 (bottom, 3 from left)
|
||||
//#define ENET_RX_ER P1_14
|
||||
//#define ENET_RXD1 P1_10 // Ethernet pin 10 (top row, 5 from left)
|
||||
//#define ENET_MOC P1_16 // Ethernet pin 6 (top row, 3 from left)
|
||||
//#define REF_CLK P1_15
|
||||
//#define ENET_RXD0 P1_09 // Ethernet pin 9 (bottom, 5 from left)
|
||||
//#define ENET_CRS P1_08 // Ethernet pin 8 (top row, 4 from left) - INPUT ONLY
|
||||
//#define ENET_TX_EN P1_04 // Ethernet pin 11 (bottom, 6 from left)
|
||||
//#define ENET_TXD0 P1_00 // Ethernet pin 12 (top row, 6 from left)
|
||||
//#define ENET_TXD1 P1_01 // Ethernet pin 13 (bottom, 7 from left)
|
||||
//#define ENET_MDIO P1_17 // Ethernet pin 5 (bottom, 3 from left)
|
||||
//#define ENET_RX_ER P1_14
|
||||
//#define ENET_RXD1 P1_10 // Ethernet pin 10 (top row, 5 from left)
|
||||
//#define ENET_MOC P1_16 // Ethernet pin 6 (top row, 3 from left)
|
||||
//#define REF_CLK P1_15
|
||||
//#define ENET_RXD0 P1_09 // Ethernet pin 9 (bottom, 5 from left)
|
||||
//#define ENET_CRS P1_08 // Ethernet pin 8 (top row, 4 from left) - INPUT ONLY
|
||||
//#define ENET_TX_EN P1_04 // Ethernet pin 11 (bottom, 6 from left)
|
||||
//#define ENET_TXD0 P1_00 // Ethernet pin 12 (top row, 6 from left)
|
||||
//#define ENET_TXD1 P1_01 // Ethernet pin 13 (bottom, 7 from left)
|
||||
|
||||
/**
|
||||
* EXP1 pins
|
||||
|
||||
Reference in New Issue
Block a user