3d-print/anadyr-marlin
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Format some pins files

Browse Source
This commit is contained in:
Scott Lahteine
2020-03-21 21:13:19 -05:00
committed by Scott Lahteine
parent 9340a33980
commit 2c325c2a7d
174 changed files with 9635 additions and 9668 deletions
Download Patch File Download Diff File Expand all files Collapse all files

158
Marlin/src/pins/ramps/pins_RUMBA.h
View File

@@ -41,56 +41,56 @@
//
// Servos
//
#define SERVO0_PIN 5
#define SERVO0_PIN 5
//
// Limit Switches
//
#define X_MIN_PIN 37
#define X_MAX_PIN 36
#define Y_MIN_PIN 35
#define Y_MAX_PIN 34
#define Z_MIN_PIN 33
#define Z_MAX_PIN 32
#define X_MIN_PIN 37
#define X_MAX_PIN 36
#define Y_MIN_PIN 35
#define Y_MAX_PIN 34
#define Z_MIN_PIN 33
#define Z_MAX_PIN 32
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 32
#define Z_MIN_PROBE_PIN 32
#endif
//
// Steppers
//
#define X_STEP_PIN 17
#define X_DIR_PIN 16
#define X_ENABLE_PIN 48
#define X_STEP_PIN 17
#define X_DIR_PIN 16
#define X_ENABLE_PIN 48
#define Y_STEP_PIN 54
#define Y_DIR_PIN 47
#define Y_ENABLE_PIN 55
#define Y_STEP_PIN 54
#define Y_DIR_PIN 47
#define Y_ENABLE_PIN 55
#define Z_STEP_PIN 57
#define Z_DIR_PIN 56
#define Z_ENABLE_PIN 62
#define Z_STEP_PIN 57
#define Z_DIR_PIN 56
#define Z_ENABLE_PIN 62
#ifndef E0_STEP_PIN
#define E0_STEP_PIN 23
#define E0_DIR_PIN 22
#define E0_ENABLE_PIN 24
#define E0_STEP_PIN 23
#define E0_DIR_PIN 22
#define E0_ENABLE_PIN 24
#endif
#ifndef E1_STEP_PIN
#define E1_STEP_PIN 26
#define E1_DIR_PIN 25
#define E1_ENABLE_PIN 27
#define E1_STEP_PIN 26
#define E1_DIR_PIN 25
#define E1_ENABLE_PIN 27
#endif
#if E1_STEP_PIN != 29
#define E2_STEP_PIN 29
#define E2_DIR_PIN 28
#define E2_ENABLE_PIN 39
#define E2_STEP_PIN 29
#define E2_DIR_PIN 28
#define E2_ENABLE_PIN 39
#endif
//
@@ -98,134 +98,134 @@
//
#ifndef TEMP_0_PIN
#if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 6 // Analog Input (connector *K1* on RUMBA thermocouple ADD ON is used)
#define TEMP_0_PIN 6 // Analog Input (connector *K1* on RUMBA thermocouple ADD ON is used)
#else
#define TEMP_0_PIN 15 // Analog Input (default connector for thermistor *T0* on rumba board is used)
#define TEMP_0_PIN 15 // Analog Input (default connector for thermistor *T0* on rumba board is used)
#endif
#endif
#ifndef TEMP_1_PIN
#if TEMP_SENSOR_1 == -1
#define TEMP_1_PIN 5 // Analog Input (connector *K2* on RUMBA thermocouple ADD ON is used)
#define TEMP_1_PIN 5 // Analog Input (connector *K2* on RUMBA thermocouple ADD ON is used)
#else
#define TEMP_1_PIN 14 // Analog Input (default connector for thermistor *T1* on rumba board is used)
#define TEMP_1_PIN 14 // Analog Input (default connector for thermistor *T1* on rumba board is used)
#endif
#endif
#if TEMP_SENSOR_2 == -1
#define TEMP_2_PIN 7 // Analog Input (connector *K3* on RUMBA thermocouple ADD ON is used <-- this can't be used when TEMP_SENSOR_BED is defined as thermocouple)
#define TEMP_2_PIN 7 // Analog Input (connector *K3* on RUMBA thermocouple ADD ON is used <-- this can't be used when TEMP_SENSOR_BED is defined as thermocouple)
#else
#define TEMP_2_PIN 13 // Analog Input (default connector for thermistor *T2* on rumba board is used)
#define TEMP_2_PIN 13 // Analog Input (default connector for thermistor *T2* on rumba board is used)
#endif
// Optional for extruder 4 or chamber:
//#define TEMP_X_PIN 12 // Analog Input (default connector for thermistor *T3* on rumba board is used)
//#define TEMP_X_PIN 12 // Analog Input (default connector for thermistor *T3* on rumba board is used)
#ifndef TEMP_CHAMBER_PIN
//#define TEMP_CHAMBER_PIN 12 // Analog Input (default connector for thermistor *T3* on rumba board is used)
//#define TEMP_CHAMBER_PIN 12 // Analog Input (default connector for thermistor *T3* on rumba board is used)
#endif
#if TEMP_SENSOR_BED == -1
#define TEMP_BED_PIN 7 // Analog Input (connector *K3* on RUMBA thermocouple ADD ON is used <-- this can't be used when TEMP_SENSOR_2 is defined as thermocouple)
#define TEMP_BED_PIN 7 // Analog Input (connector *K3* on RUMBA thermocouple ADD ON is used <-- this can't be used when TEMP_SENSOR_2 is defined as thermocouple)
#else
#define TEMP_BED_PIN 11 // Analog Input (default connector for thermistor *THB* on rumba board is used)
#define TEMP_BED_PIN 11 // Analog Input (default connector for thermistor *THB* on rumba board is used)
#endif
//
// Heaters / Fans
//
#define HEATER_0_PIN 2
#define HEATER_1_PIN 3
#define HEATER_2_PIN 6
#define HEATER_3_PIN 8
#define HEATER_BED_PIN 9
#define HEATER_0_PIN 2
#define HEATER_1_PIN 3
#define HEATER_2_PIN 6
#define HEATER_3_PIN 8
#define HEATER_BED_PIN 9
#ifndef FAN_PIN
#define FAN_PIN 7
#define FAN_PIN 7
#endif
#ifndef FAN1_PIN
#define FAN1_PIN 8
#define FAN1_PIN 8
#endif
//
// Misc. Functions
//
#define LED_PIN 13
#define PS_ON_PIN 45
#define KILL_PIN 46
#define CASE_LIGHT_PIN 45
#define LED_PIN 13
#define PS_ON_PIN 45
#define KILL_PIN 46
#define CASE_LIGHT_PIN 45
//
// M3/M4/M5 - Spindle/Laser Control
//
#ifndef SPINDLE_LASER_PWM_PIN
#define SPINDLE_LASER_PWM_PIN 4 // Hardware PWM. Pin 4 interrupts OC0* and OC1* always in use?
#define SPINDLE_LASER_PWM_PIN 4 // Hardware PWM. Pin 4 interrupts OC0* and OC1* always in use?
#endif
#ifndef SPINDLE_LASER_ENA_PIN
#define SPINDLE_LASER_ENA_PIN 14 // Pullup!
#define SPINDLE_LASER_ENA_PIN 14 // Pullup!
#endif
#ifndef SPINDLE_DIR_PIN
#define SPINDLE_DIR_PIN 15
#define SPINDLE_DIR_PIN 15
#endif
//
// LCD / Controller
//
#if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
#define LCD_PINS_DC 38 // Set as output on init
#define LCD_PINS_RS 41 // Pull low for 1s to init
#define LCD_PINS_DC 38 // Set as output on init
#define LCD_PINS_RS 41 // Pull low for 1s to init
// DOGM SPI LCD Support
#define DOGLCD_CS 19
#define DOGLCD_MOSI 42
#define DOGLCD_SCK 18
#define DOGLCD_A0 LCD_PINS_DC
#define DOGLCD_CS 19
#define DOGLCD_MOSI 42
#define DOGLCD_SCK 18
#define DOGLCD_A0 LCD_PINS_DC
#elif ENABLED(FYSETC_MINI_12864)
#define DOGLCD_CS 42
#define DOGLCD_A0 19
#define DOGLCD_MOSI 51
#define DOGLCD_SCK 52
#define DOGLCD_CS 42
#define DOGLCD_A0 19
#define DOGLCD_MOSI 51
#define DOGLCD_SCK 52
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN 18 // Must be high or open for LCD to operate normally.
#define LCD_RESET_PIN 18 // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN 41
#define RGB_LED_R_PIN 41
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN 38
#define RGB_LED_G_PIN 38
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN 40
#define RGB_LED_B_PIN 40
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define NEOPIXEL_PIN 25
#define NEOPIXEL_PIN 25
#endif
#else
#define LCD_PINS_RS 19
#define LCD_PINS_ENABLE 42
#define LCD_PINS_D4 18
#define LCD_PINS_D5 38
#define LCD_PINS_D6 41
#define LCD_PINS_RS 19
#define LCD_PINS_ENABLE 42
#define LCD_PINS_D4 18
#define LCD_PINS_D5 38
#define LCD_PINS_D6 41
#endif
#define LCD_PINS_D7 40
#define LCD_PINS_D7 40
//
// Beeper, SD Card, Encoder
//
#define BEEPER_PIN 44
#define BEEPER_PIN 44
#if ENABLED(SDSUPPORT)
#define SDSS 53
#define SD_DETECT_PIN 49
#define SDSS 53
#define SD_DETECT_PIN 49
#endif
#if ENABLED(NEWPANEL)
#define BTN_EN1 11
#define BTN_EN2 12
#define BTN_ENC 43
#define BTN_EN1 11
#define BTN_EN2 12
#define BTN_ENC 43
#endif