From 3b46d0d69e672110bbe284aeb53a02e68254b16e Mon Sep 17 00:00:00 2001
From: Dmitry Chumak <mega.venik@gmail.com>
Date: Tue, 22 Feb 2022 20:13:20 +0300
Subject: [PATCH] 3dtouch settings

---
 Marlin/Configuration.h | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 77d78682f..510c48616 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -634,7 +634,7 @@
   #define ENDSTOPPULLUP_XMIN
   #define ENDSTOPPULLUP_YMIN
   //#define ENDSTOPPULLUP_ZMIN
-  //#define ENDSTOPPULLUP_ZMIN_PROBE
+  #define ENDSTOPPULLUP_ZMIN_PROBE
 #endif
 
 // Enable pulldown for all endstops to prevent a floating state
@@ -657,7 +657,7 @@
 #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe.
 
 /**
  * Stepper Drivers
@@ -891,12 +891,12 @@
  * Z Servo Probe, such as an endstop switch on a rotating arm.
  */
 #define Z_PROBE_SERVO_NR 0       // Defaults to SERVO 0 connector.
-#define Z_SERVO_ANGLES { 110, 65 } // Z Servo Deploy and Stow angles
+// #define Z_SERVO_ANGLES { 10, 90 } // Z Servo Deploy and Stow angles
 
 /**
  * The BLTouch probe uses a Hall effect sensor and emulates a servo.
  */
-//#define BLTOUCH
+#define BLTOUCH
 
 /**
  * Pressure sensor with a BLTouch-like interface
@@ -983,7 +983,7 @@
  *     |    [-]    |
  *     O-- FRONT --+
  */
-#define NOZZLE_TO_PROBE_OFFSET {58, 4, 0 }
+#define NOZZLE_TO_PROBE_OFFSET {-30, -19, 0 }
 
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.