Add MKS UI (TFT_LITTLE_VGL_UI) (#18071)
This commit is contained in:
makerbase
GitHub
218
Marlin/src/lcd/extui/lib/mks_ui/printer_opration.cpp
Normal file
218
Marlin/src/lcd/extui/lib/mks_ui/printer_opration.cpp
Normal file
@@ -0,0 +1,218 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#include "../../../../inc/MarlinConfigPre.h"
|
||||
|
||||
#if ENABLED(TFT_LITTLE_VGL_UI)
|
||||
|
||||
#include "../../../../MarlinCore.h"
|
||||
|
||||
#include "lv_conf.h"
|
||||
#include "draw_ui.h"
|
||||
#include "../../../../module/temperature.h"
|
||||
#include "../../../../module/motion.h"
|
||||
#include "../../../../sd/cardreader.h"
|
||||
#include "../../../../gcode/queue.h"
|
||||
|
||||
#if ENABLED(POWER_LOSS_RECOVERY)
|
||||
#include "../../../../feature/powerloss.h"
|
||||
#endif
|
||||
|
||||
#include "../../../../gcode/gcode.h"
|
||||
#include "../../../../module/planner.h"
|
||||
|
||||
extern uint32_t To_pre_view;
|
||||
extern uint8_t flash_preview_begin, default_preview_flg, gcode_preview_over;
|
||||
|
||||
void printer_state_polling() {
|
||||
if (uiCfg.print_state == PAUSING) {
|
||||
#if ENABLED(SDSUPPORT)
|
||||
if (!planner.has_blocks_queued() && card.getIndex() > MIN_FILE_PRINTED) //<2F><><EFBFBD><EFBFBD> <20>ļ<EFBFBD><C4BC><EFBFBD> M109<30><39>M190ָ<30><D6B8>
|
||||
uiCfg.waitEndMoves++;
|
||||
|
||||
if (uiCfg.waitEndMoves > 20) {
|
||||
uiCfg.waitEndMoves = 0;
|
||||
planner.synchronize();
|
||||
gcode.process_subcommands_now_P(PSTR("M25"));
|
||||
gcode.process_subcommands_now_P(PSTR("G91"));
|
||||
gcode.process_subcommands_now_P(PSTR("G1 Z5"));
|
||||
gcode.process_subcommands_now_P(PSTR("G90"));
|
||||
|
||||
uiCfg.print_state = PAUSED;
|
||||
|
||||
//#if ENABLED(POWER_LOSS_RECOVERY)
|
||||
// if (recovery.enabled) recovery.save(true);
|
||||
//#endif
|
||||
gCfgItems.pause_reprint = 1;
|
||||
update_spi_flash();
|
||||
}
|
||||
#endif
|
||||
}
|
||||
else {
|
||||
uiCfg.waitEndMoves = 0;
|
||||
}
|
||||
|
||||
if (uiCfg.print_state == PAUSED) {
|
||||
|
||||
}
|
||||
|
||||
if (uiCfg.print_state == RESUMING) {
|
||||
if (IS_SD_PAUSED()) {
|
||||
gcode.process_subcommands_now_P(PSTR("G91"));
|
||||
gcode.process_subcommands_now_P(PSTR("G1 Z-5"));
|
||||
gcode.process_subcommands_now_P(PSTR("G90"));
|
||||
gcode.process_subcommands_now_P(PSTR("M24"));
|
||||
uiCfg.print_state = WORKING;
|
||||
start_print_time();
|
||||
|
||||
gCfgItems.pause_reprint = 0;
|
||||
update_spi_flash();
|
||||
}
|
||||
}
|
||||
#if ENABLED(POWER_LOSS_RECOVERY)
|
||||
if (uiCfg.print_state == REPRINTED) {
|
||||
memset(public_buf_m, 0, sizeof(public_buf_m));
|
||||
#if HOTENDS
|
||||
HOTEND_LOOP() {
|
||||
const int16_t et = recovery.info.target_temperature[e];
|
||||
if (et) {
|
||||
#if HOTENDS > 1
|
||||
sprintf_P(public_buf_m, PSTR("T%i"), e);
|
||||
gcode.process_subcommands_now(public_buf_m);
|
||||
#endif
|
||||
sprintf_P(public_buf_m, PSTR("M109 S%i"), et);
|
||||
gcode.process_subcommands_now(public_buf_m);
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
if (gCfgItems.pause_reprint == 1) {
|
||||
gcode.process_subcommands_now_P(PSTR("G91"));
|
||||
gcode.process_subcommands_now_P(PSTR("G1 Z-5"));
|
||||
gcode.process_subcommands_now_P(PSTR("G90"));
|
||||
}
|
||||
recovery.resume();
|
||||
|
||||
uiCfg.print_state = WORKING;
|
||||
start_print_time();
|
||||
|
||||
gCfgItems.pause_reprint = 0;
|
||||
update_spi_flash();
|
||||
}
|
||||
#endif
|
||||
|
||||
if (uiCfg.print_state == WORKING)
|
||||
filament_check();
|
||||
}
|
||||
|
||||
void filament_pin_setup() {
|
||||
#if PIN_EXISTS(MT_DET_1)
|
||||
pinMode(MT_DET_1_PIN, INPUT_PULLUP);
|
||||
#endif
|
||||
#if PIN_EXISTS(MT_DET_2)
|
||||
pinMode(MT_DET_2_PIN, INPUT_PULLUP);
|
||||
#endif
|
||||
#if PIN_EXISTS(MT_DET_3)
|
||||
pinMode(MT_DET_3_PIN, INPUT_PULLUP);
|
||||
#endif
|
||||
}
|
||||
|
||||
void filament_check() {
|
||||
const int FIL_DELAY = 20;
|
||||
#if PIN_EXISTS(MT_DET_1)
|
||||
static int fil_det_count_1 = 0;
|
||||
if (!READ(MT_DET_1_PIN) && !MT_DET_PIN_INVERTING)
|
||||
fil_det_count_1++;
|
||||
else if (READ(MT_DET_1_PIN) && MT_DET_PIN_INVERTING)
|
||||
fil_det_count_1++;
|
||||
else if (fil_det_count_1 > 0)
|
||||
fil_det_count_1--;
|
||||
|
||||
if (!READ(MT_DET_1_PIN) && !MT_DET_PIN_INVERTING)
|
||||
fil_det_count_1++;
|
||||
else if (READ(MT_DET_1_PIN) && MT_DET_PIN_INVERTING)
|
||||
fil_det_count_1++;
|
||||
else if (fil_det_count_1 > 0)
|
||||
fil_det_count_1--;
|
||||
#endif
|
||||
|
||||
#if PIN_EXISTS(MT_DET_2)
|
||||
static int fil_det_count_2 = 0;
|
||||
if (!READ(MT_DET_2_PIN) && !MT_DET_PIN_INVERTING)
|
||||
fil_det_count_2++;
|
||||
else if (READ(MT_DET_2_PIN) && MT_DET_PIN_INVERTING)
|
||||
fil_det_count_2++;
|
||||
else if (fil_det_count_2 > 0)
|
||||
fil_det_count_2--;
|
||||
|
||||
if (!READ(MT_DET_2_PIN) && !MT_DET_PIN_INVERTING)
|
||||
fil_det_count_2++;
|
||||
else if (READ(MT_DET_2_PIN) && MT_DET_PIN_INVERTING)
|
||||
fil_det_count_2++;
|
||||
else if (fil_det_count_2 > 0)
|
||||
fil_det_count_2--;
|
||||
#endif
|
||||
|
||||
#if PIN_EXISTS(MT_DET_3)
|
||||
static int fil_det_count_3 = 0;
|
||||
if (!READ(MT_DET_3_PIN) && !MT_DET_PIN_INVERTING)
|
||||
fil_det_count_3++;
|
||||
else if (READ(MT_DET_3_PIN) && MT_DET_PIN_INVERTING)
|
||||
fil_det_count_3++;
|
||||
else if (fil_det_count_3 > 0)
|
||||
fil_det_count_3--;
|
||||
|
||||
if (!READ(MT_DET_3_PIN) && !MT_DET_PIN_INVERTING)
|
||||
fil_det_count_3++;
|
||||
else if (READ(MT_DET_3_PIN) && MT_DET_PIN_INVERTING)
|
||||
fil_det_count_3++;
|
||||
else if (fil_det_count_3 > 0)
|
||||
fil_det_count_3--;
|
||||
#endif
|
||||
|
||||
if (
|
||||
#if PIN_EXISTS(MT_DET_1)
|
||||
fil_det_count_1 >= FIL_DELAY
|
||||
#else
|
||||
false
|
||||
#endif
|
||||
#if PIN_EXISTS(MT_DET_2)
|
||||
|| fil_det_count_2 >= FIL_DELAY
|
||||
#endif
|
||||
#if PIN_EXISTS(MT_DET_3)
|
||||
|| fil_det_count_3 >= FIL_DELAY
|
||||
#endif
|
||||
) {
|
||||
clear_cur_ui();
|
||||
card.pauseSDPrint();
|
||||
stop_print_time();
|
||||
uiCfg.print_state = PAUSING;
|
||||
|
||||
if (gCfgItems.from_flash_pic == 1)
|
||||
flash_preview_begin = 1;
|
||||
else
|
||||
default_preview_flg = 1;
|
||||
|
||||
lv_draw_printing();
|
||||
}
|
||||
}
|
||||
|
||||
#endif // TFT_LITTLE_VGL_UI
|
||||
Reference in New Issue
Block a user