3d-print/anadyr-marlin
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Fix Baby Stepping on 32-Bit platforms (#8001)

Browse Source 
Also, Max7219 debug code was used for this effort.   It has been
improved and hardened.
This commit is contained in:
Roxy-3D
2017-10-16 16:29:37 -05:00
committed by GitHub
parent 3b7b0492f8
commit 6cb26c98c8
6 changed files with 196 additions and 61 deletions
Download Patch File Download Diff File Expand all files Collapse all files

20
Marlin/src/config/examples/Folger Tech/i3-2020/Configuration_adv.h
View File

@@ -534,7 +534,7 @@
#endif
// Show a progress bar on HD44780 LCDs for SD printing
#define LCD_PROGRESS_BAR
//#define LCD_PROGRESS_BAR
#if ENABLED(LCD_PROGRESS_BAR)
// Amount of time (ms) to show the bar
@@ -592,6 +592,7 @@
// Enable this option and reduce the value to optimize screen updates.
// The normal delay is 10µs. Use the lowest value that still gives a reliable display.
//#define DOGM_SPI_DELAY_US 5
#endif // DOGLCD
// @section safety
@@ -620,7 +621,7 @@
#if ENABLED(BABYSTEPPING)
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
#define BABYSTEP_MULTIPLICATOR 100 // Babysteps are very small. Increase for faster motion.
#define BABYSTEP_MULTIPLICATOR 16 // Babysteps are very small. Increase for faster motion.
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
@@ -1313,8 +1314,8 @@
#define USER_DESC_4 "Heat Bed/Home/Level"
#define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
//#define USER_DESC_5 "Home & Info"
//#define USER_GCODE_5 "G28\nM503"
#define USER_DESC_5 "Home & Info"
#define USER_GCODE_5 "G28\nM503"
#endif
/**
@@ -1423,15 +1424,20 @@
//#define MAX7219_DIN_PIN 57 // on RAMPS
//#define MAX7219_LOAD_PIN 44 // on RAMPS
#define MAX7219_CLK_PIN 77 // on Re-ARM // Configuration of the 3 pins to control the display
#define MAX7219_DIN_PIN 78 // on Re-ARM
#define MAX7219_LOAD_PIN 79 // on Re-ARM
//#define MAX7219_CLK_PIN 77 // on Re-ARM // Configuration of the 3 pins to control the display
//#define MAX7219_DIN_PIN 78 // on Re-ARM
//#define MAX7219_LOAD_PIN 79 // on Re-ARM
#define MAX7219_CLK_PIN 30 // for RAMPS E1 // Configuration of the 3 pins to control the display
#define MAX7219_DIN_PIN 34 // for RAMPS E1
#define MAX7219_LOAD_PIN 36 // for RAMPS E1
/**
* Sample debug features
* If you add more debug displays, be careful to avoid conflicts!
*/
#define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
#define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row
#define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row