3d-print/anadyr-marlin
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Fix and improve FYSETC LCD support (#13767)

Browse Source
This commit is contained in:
Bob Kuhn
2019-04-21 20:48:53 -05:00
committed by Scott Lahteine
parent 4e35e6c705
commit 81ca5a4cd4
15 changed files with 369 additions and 142 deletions
Download Patch File Download Diff File Expand all files Collapse all files

67
Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp
View File

@@ -66,42 +66,47 @@
#define PAGE_HEIGHT 8
static const uint8_t u8g_dev_uc1701_mini12864_HAL_init_seq[] PROGMEM = {
U8G_ESC_CS(0), /* disable chip */
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_RST(1), /* do reset low pulse with (1*16)+2 milliseconds */
U8G_ESC_CS(1), /* enable chip */
U8G_ESC_CS(0), /* disable chip */
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_RST(1), /* do reset low pulse with (1*16)+2 milliseconds */
U8G_ESC_CS(1), /* enable chip */
0x0E2, /* soft reset */
0x040, /* set display start line to 0 */
0x0A0, /* ADC set to reverse */
0x0C8, /* common output mode */
0x0A6, /* display normal, bit val 0: LCD pixel off. */
0x0A2, /* LCD bias 1/9 */
0x02F, /* all power control circuits on */
0x0F8, /* set booster ratio to */
0x000, /* 4x */
0x023, /* set V0 voltage resistor ratio to large */
0x081, /* set contrast */
0x027, /* contrast value */
0x0AC, /* indicator */
0x000, /* disable */
0x0AF, /* display on */
0x0E2, /* soft reset */
0x040, /* set display start line to 0 */
0x0A0, /* ADC set to reverse */
0x0C8, /* common output mode */
0x0A6, /* display normal, bit val 0: LCD pixel off. */
0x0A2, /* LCD bias 1/9 */
0x02F, /* all power control circuits on */
0x0F8, /* set booster ratio to */
0x000, /* 4x */
0x023, /* set V0 voltage resistor ratio to large */
0x081, /* set contrast */
0x027, /* contrast value */
0x0AC, /* indicator */
0x000, /* disable */
0x0AF, /* display on */
U8G_ESC_DLY(100), /* delay 100 ms */
0x0A5, /* display all points, ST7565 */
U8G_ESC_DLY(100), /* delay 100 ms */
U8G_ESC_DLY(100), /* delay 100 ms */
0x0A4, /* normal display */
U8G_ESC_CS(0), /* disable chip */
U8G_ESC_END /* end of sequence */
U8G_ESC_CS(0), /* disable chip */
U8G_ESC_DLY(100), /* delay 100 ms */
U8G_ESC_CS(1), /* enable chip */
0x0A5, /* display all points, ST7565 */
U8G_ESC_CS(0), /* disable chip */
U8G_ESC_DLY(100), /* delay 100 ms */
U8G_ESC_DLY(100), /* delay 100 ms */
U8G_ESC_CS(1), /* enable chip */
0x0A4, /* normal display */
U8G_ESC_CS(0), /* disable chip */
U8G_ESC_END /* end of sequence */
};
static const uint8_t u8g_dev_uc1701_mini12864_HAL_data_start[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), /* enable chip */
0x010, /* set upper 4 bit of the col adr to 0 */
0x000, /* set lower 4 bit of the col adr to 4 */
U8G_ESC_END /* end of sequence */
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), /* enable chip */
0x010, /* set upper 4 bit of the col adr to 0 */
0x000, /* set lower 4 bit of the col adr to 4 */
U8G_ESC_END /* end of sequence */
};
uint8_t u8g_dev_uc1701_mini12864_HAL_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) {