Clean up LCD conditionals, DWIN

2020-09-06 21:40:58 -05:00
parent b709baba7a
commit a445746a8b
35 changed files with 253 additions and 169 deletions
--- a/Marlin/src/lcd/dwin/e3v2/rotary_encoder.h
+++ b/Marlin/src/lcd/dwin/e3v2/rotary_encoder.h
@@ -0,0 +1,105 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+  ******************************************************************************
+  * @file     rotary_encoder.h
+  * @author   LEO / Creality3D
+  * @date     2019/07/06
+  * @version  2.0.1
+  * @brief    旋转编码器操作函数
+  ******************************************************************************
+**/
+
+#include "../../../inc/MarlinConfig.h"
+#include "../../../MarlinCore.h"
+
+/*********************** Encoder Set ***********************/
+
+#define ENCODER_PHASE_0  0
+#define ENCODER_PHASE_1  2
+#define ENCODER_PHASE_2  3
+#define ENCODER_PHASE_3  1
+
+#define ENCODER_PULSES_PER_STEP  4
+
+#define BUTTON_PRESSED(BN) !READ(BTN_## BN)
+
+typedef struct {
+  bool encoderRateEnabled = 0;
+  int encoderMoveValue = 0;
+  millis_t lastEncoderTime = 0;
+} ENCODER_Rate;
+
+extern ENCODER_Rate EncoderRate;
+
+typedef enum {
+  ENCODER_DIFF_NO    = 0,
+	ENCODER_DIFF_CW    = 1,
+  ENCODER_DIFF_CCW   = 2,
+	ENCODER_DIFF_ENTER = 3
+} ENCODER_DiffState;
+
+/*编码器初始化 PB12:Encoder_A PB13:Encoder_B PB14:Encoder_C*/
+void Encoder_Configuration(void);
+
+/*接收数据解析 返回值:ENCODER_DIFF_NO,无状态; ENCODER_DIFF_CW,顺时针旋转; ENCODER_DIFF_CCW,逆时针旋转; ENCODER_DIFF_ENTER,按下*/
+ENCODER_DiffState Encoder_ReceiveAnalyze(void);
+
+
+/*********************** Encoder LED ***********************/
+
+#if PIN_EXISTS(LCD_LED)
+
+  #define LED_NUM  4
+  #define LED_DATA_HIGH  WRITE(LCD_LED_PIN, 1)
+  #define LED_DATA_LOW   WRITE(LCD_LED_PIN, 0)
+
+  #define RGB_SCALE_R10_G7_B5  1
+  #define RGB_SCALE_R10_G7_B4  2
+  #define RGB_SCALE_R10_G8_B7  3
+  #define RGB_SCALE_NEUTRAL_WHITE  RGB_SCALE_R10_G7_B5 //正白
+  #define RGB_SCALE_WARM_WHITE  RGB_SCALE_R10_G7_B4 //暖白
+  #define RGB_SCALE_COOL_WHITE  RGB_SCALE_R10_G8_B7 //冷白
+
+  extern unsigned int LED_DataArray[LED_NUM];
+
+  /*状态LED初始化*/
+  void STATE_LED_Configuration(void);
+
+	/*LED灯操作*/
+  void LED_Action(void);
+
+  /*LED初始化*/
+  void LED_Configuration(void);
+
+  /*LED写数据*/
+  void LED_WriteData(void);
+
+  /*LED控制 RGB_Scale:RGB色彩配比 luminance:亮度(0~0xFF)*/
+  void LED_Control(unsigned char RGB_Scale, unsigned char luminance);
+
+  /*LED渐变控制 RGB_Scale:RGB色彩配比 luminance:亮度(0~0xFF) change_Time:渐变时间(ms)*/
+  void LED_GraduallyControl(unsigned char RGB_Scale, unsigned char luminance, unsigned int change_Interval);
+
+#endif