3d-print/anadyr-marlin
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Prevent compilation of unused u8g-oriented code

Browse Source
This commit is contained in:
Scott Lahteine
2018-05-14 05:35:05 -05:00
parent 35258dd50b
commit fb608938f8
14 changed files with 386 additions and 368 deletions
Download Patch File Download Diff File Expand all files Collapse all files

53
Marlin/src/lcd/dogm/u8g_dev_st7565_64128n_HAL.cpp
View File

@@ -67,43 +67,43 @@
/* init sequence from https://github.com/adafruit/ST7565-LCD/blob/master/ST7565/ST7565.cpp */
static const uint8_t u8g_dev_st7565_64128n_HAL_init_seq[] PROGMEM = {
U8G_ESC_CS(0), // disable chip
U8G_ESC_ADR(0), // instruction mode
U8G_ESC_CS(1), // enable chip
U8G_ESC_RST(15), // do reset low pulse with (15*16)+2 milliseconds (=maximum delay)*/
U8G_ESC_CS(0), // disable chip
U8G_ESC_ADR(0), // instruction mode
U8G_ESC_CS(1), // enable chip
U8G_ESC_RST(15), // do reset low pulse with (15*16)+2 milliseconds (=maximum delay)*/
0x0A2, // 0x0A2: LCD bias 1/9 (according to Displaytech 64128N datasheet)
0x0A0, // Normal ADC Select (according to Displaytech 64128N datasheet)
0x0A2, // 0x0A2: LCD bias 1/9 (according to Displaytech 64128N datasheet)
0x0A0, // Normal ADC Select (according to Displaytech 64128N datasheet)
0x0C8, // common output mode: set scan direction normal operation/SHL Select, 0x0C0 --> SHL = 0, normal, 0x0C8 --> SHL = 1
0x040, // Display start line for Displaytech 64128N
0x0C8, // common output mode: set scan direction normal operation/SHL Select, 0x0C0 --> SHL = 0, normal, 0x0C8 --> SHL = 1
0x040, // Display start line for Displaytech 64128N
0x028 | 0x04, // power control: turn on voltage converter
U8G_ESC_DLY(50), // delay 50 ms
0x028 | 0x04, // power control: turn on voltage converter
U8G_ESC_DLY(50), // delay 50 ms
0x028 | 0x06, // power control: turn on voltage regulator
U8G_ESC_DLY(50), // delay 50 ms
0x028 | 0x06, // power control: turn on voltage regulator
U8G_ESC_DLY(50), // delay 50 ms
0x028 | 0x07, // power control: turn on voltage follower
U8G_ESC_DLY(50), // delay 50 ms
0x028 | 0x07, // power control: turn on voltage follower
U8G_ESC_DLY(50), // delay 50 ms
0x010, // Set V0 voltage resistor ratio. Setting for controlling brightness of Displaytech 64128N
0x010, // Set V0 voltage resistor ratio. Setting for controlling brightness of Displaytech 64128N
0x0A6, // display normal, bit val 0: LCD pixel off.
0x0A6, // display normal, bit val 0: LCD pixel off.
0x081, // set contrast
0x01E, // Contrast value. Setting for controlling brightness of Displaytech 64128N
0x081, // set contrast
0x01E, // Contrast value. Setting for controlling brightness of Displaytech 64128N
0x0AF, // display on
0x0AF, // display on
U8G_ESC_DLY(100), // delay 100 ms
0x0A5, // display all points, ST7565
U8G_ESC_DLY(100), // delay 100 ms
U8G_ESC_DLY(100), // delay 100 ms
0x0A4, // normal display
U8G_ESC_CS(0), // disable chip
U8G_ESC_END // end of sequence
U8G_ESC_DLY(100), // delay 100 ms
0x0A5, // display all points, ST7565
U8G_ESC_DLY(100), // delay 100 ms
U8G_ESC_DLY(100), // delay 100 ms
0x0A4, // normal display
U8G_ESC_CS(0), // disable chip
U8G_ESC_END // end of sequence
};
static const uint8_t u8g_dev_st7565_64128n_HAL_data_start[] PROGMEM = {
@@ -211,7 +211,6 @@ uint8_t u8g_dev_st7565_64128n_HAL_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg,
return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
}
U8G_PB_DEV(u8g_dev_st7565_64128n_HAL_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_64128n_HAL_fn, U8G_COM_HAL_SW_SPI_FN);
uint8_t u8g_dev_st7565_64128n_HAL_2x_buf[WIDTH*2] U8G_NOCOMMON ;