Scott Lahteine 42f9921482 Ignore Z min endstop with separate Z-probe ...

To allow for the case where a Z endstop (e.g., hall effect) is higher than the probe trigger point, don't check the Z min endstop during probe moves. See #11134

2018-06-28 05:06:11 -05:00

..

thermistor

Hephestos config updates (#10960)

2018-06-07 21:23:55 -05:00

configuration_store.cpp

Make max_e_jerk an array to reduce CPU usage (#11118)

2018-06-26 22:38:31 -04:00

configuration_store.h

Unsigned eeprom mesh addresses

2018-06-15 15:51:57 -05:00

delta.cpp

Use bit flags for homed/known

2018-06-11 22:05:16 -05:00

delta.h

General DELTA_IK macro

2017-12-21 22:41:57 -06:00

endstops.cpp

Ignore Z min endstop with separate Z-probe

2018-06-28 05:06:11 -05:00

endstops.h

Fix endstops compilation error

2018-06-25 12:10:17 -04:00

motion.cpp

Use bit flags for homed/known

2018-06-11 22:05:16 -05:00

motion.h

Apply _AXIS macro

2018-05-13 06:51:01 -05:00

planner_bezier.cpp

Refactor and optimize Stepper/Planner

2018-05-20 06:23:58 -05:00

planner_bezier.h

Implement BEZIER_JERK_CONTROL

2018-04-07 21:03:28 -05:00

planner.cpp

Fix stepper/planner block handling, race conditions (#11098)

2018-06-27 18:11:16 -05:00

planner.h

Fix stepper/planner block handling, race conditions (#11098)

2018-06-27 18:11:16 -05:00

printcounter.cpp

Use static classes for job timers (#9938)

2018-03-04 21:23:43 -06:00

printcounter.h

Use static classes for job timers (#9938)

2018-03-04 21:23:43 -06:00

probe.cpp

Use bit flags for homed/known

2018-06-11 22:05:16 -05:00

probe.h

Allow Z_AFTER_PROBING to be 0

2018-04-30 03:25:47 -05:00

scara.cpp

Move get_axis_position_mm to Planner (#10718)

2018-05-12 09:59:11 -05:00

scara.h

Operate in Native Machine Space

2017-11-04 00:05:38 -05:00

servo.cpp

Move servo code to modules/servo.*

2017-11-19 14:23:02 -06:00

servo.h

Z Endstop Servo => Z Probe Servo

2018-04-01 23:54:21 -05:00

speed_lookuptable.h

Module updates

2017-09-21 16:26:42 -05:00

stepper_indirection.cpp

Fix coolstep_min_speed / sensorless homing

2018-06-12 22:12:46 -05:00

stepper_indirection.h

Modify E-stepping macros for use in LINEAR_ADVANCE (#10885)

2018-05-28 19:34:08 -05:00

stepper.cpp

Eliminate stepper.* signed/unsigned warnings

2018-06-27 23:10:51 -05:00

stepper.h

Eliminate stepper.* signed/unsigned warnings

2018-06-27 23:10:51 -05:00

temperature.cpp

Fix ADC key and chamber temp

2018-06-10 20:11:40 -05:00

temperature.h

Use bit flags for homed/known

2018-06-11 22:05:16 -05:00

tool_change.cpp

Use bit flags for homed/known

2018-06-11 22:05:16 -05:00

tool_change.h

Fix switching extruder

2018-05-19 17:05:15 -05:00