Scott Lahteine f1347f783d Optimize thermistor table 71 ...

agData in Table 71 is extremely oversampled (see Issue #11220). I have removed the data points that perform *worse* than linearly interpolating the remaining points, and fixed up two points that were simply rounded incorrectly.

Co-Authored-By: Aaron Griffith <aargri@gmail.com>

2018-08-13 02:54:55 -05:00

..

thermistor

Optimize thermistor table 71

2018-08-13 02:54:55 -05:00

configuration_store.cpp

Simplify stepper driver per-axis selection

2018-07-25 02:47:43 -05:00

configuration_store.h

Unsigned eeprom mesh addresses

2018-06-15 15:51:57 -05:00

delta.cpp

Followup to float maths patch

2018-07-06 21:34:09 -05:00

delta.h

Optimize delta kinematics

2018-07-04 22:28:56 -05:00

endstops.cpp

Easier to disable homing validation (#11458)

2018-08-06 23:11:37 -05:00

endstops.h

Easier to disable homing validation (#11458)

2018-08-06 23:11:37 -05:00

motion.cpp

[2.0.x] Fix Dual X Carriage tool change crash (#11447)

2018-08-03 20:47:29 -05:00

motion.h

Replace double with float, optimize calculation

2018-07-04 22:28:56 -05:00

planner_bezier.cpp

Replace double with float, optimize calculation

2018-07-04 22:28:56 -05:00

planner_bezier.h

Implement BEZIER_JERK_CONTROL

2018-04-07 21:03:28 -05:00

planner.cpp

UBL/planner patch tweaks

2018-08-11 22:50:45 -05:00

planner.h

Replace double with float, optimize calculation

2018-07-04 22:28:56 -05:00

printcounter.cpp

Replace double with float, optimize calculation

2018-07-04 22:28:56 -05:00

printcounter.h

Replace double with float, optimize calculation

2018-07-04 22:28:56 -05:00

probe.cpp

Add Z_CLEARANCE_MULTI_PROBE

2018-07-12 22:46:34 -05:00

probe.h

[2.0.x] different bltouch init (#11135)

2018-07-26 05:04:09 -05:00

scara.cpp

Move get_axis_position_mm to Planner (#10718)

2018-05-12 09:59:11 -05:00

scara.h

Operate in Native Machine Space

2017-11-04 00:05:38 -05:00

servo.cpp

Move servo code to modules/servo.*

2017-11-19 14:23:02 -06:00

servo.h

Z Endstop Servo => Z Probe Servo

2018-04-01 23:54:21 -05:00

speed_lookuptable.h

Module updates

2017-09-21 16:26:42 -05:00

stepper_indirection.cpp

Simplify stepper driver per-axis selection

2018-07-25 02:47:43 -05:00

stepper_indirection.h

Simplify stepper driver per-axis selection

2018-07-25 02:47:43 -05:00

stepper.cpp

[2.0.x] Better timing handling (#11461)

2018-08-06 23:13:36 -05:00

stepper.h

Eliminate stepper.* signed/unsigned warnings

2018-06-27 23:10:51 -05:00

temperature.cpp

Ensure ADC conversion is complete before reading (#11336)

2018-07-26 03:59:19 -05:00

temperature.h

Ensure ADC conversion is complete before reading (#11336)

2018-07-26 03:59:19 -05:00

tool_change.cpp

[2.0.x] Fix Dual X Carriage tool change crash (#11447)

2018-08-03 20:47:29 -05:00

tool_change.h

Fix switching extruder

2018-05-19 17:05:15 -05:00